Heatstrip Classic Range | A-West Distributors

Electric radiant heater ideal for your protected alfresco area, pergola, veranda, café or difficult to heat indoor areas
Stylish, sleek, unobtrusive design with a black front profile
Efficient, cost-effective heating providing gentle warmth
Corrosion protected for even the toughest environment
Easy DIY installation for 2 models (THH1800A & THH2400A. THH3200A must be installed by a licensed electrician) and multiple mounting options
2-year residential warranty and 1-year commercial warranty
Australian designed and engineered

For the majority of outdoor applications, the most effective method is to spot heat a table or similar area. The below diagrams provides an easy selection guide for the approximate model and quantity of heaters required to heat common residential table settings. Selections are based on HEATSTRIP® Classic being mounted at 2.4m from the floor in an undercover fully enclosed outdoor area.

General recommendations for HEATSTRIP® Classic:
Ideal mounting location: ceiling mounted, directly above area to be heated (eg. above a table), but can also be mounted on a wall and angled downwards. • Protection from winds by café blinds, screens etc. is highly recommended.
The below table outlines the coverage of each HEATSTRIP® Classic model (in m2), based on 3 different scenarios. For example, for an outdoor area that is protected from prevailing winds by walls, café blinds etc, Model THH1800A will cover 3m2 and Model THH2400A will cover 4.8m2.

Screen Shot 2022-12-05 at 10.41.24 am.png

Heatstrip® Classic

Materials of Construction: High temperature ceramic coated extruded alloy. IP55 Rated.